Please use this identifier to cite or link to this item: http://hdl.handle.net/10419/22632
Authors: 
Theis, Winfried
Webber, Oliver
Raabe, Nils
Weihs, Claus
Year of Publication: 
2005
Series/Report no.: 
Technical Report / Universität Dortmund, SFB 475 Komplexitätsreduktion in Multivariaten Datenstrukturen 2005,42
Abstract: 
One serious problem in deep-hole drilling is the formation of a dynamic disturbance called spiralling which causes holes with several lobes. Since such lobes are a severe impairment of the bore hole the formation of spiralling has to be prevented. Gessesse et al. (1994) explain spiralling by the coincidence of bending modes and multiples of the rotary frequency. They derive this from an elaborate finite elements model of the process. In online measurements we detected slowly changing frequency patterns similar to those calculated by Gessesse et al. We therefore propose a method to estimate the explanation of spiralling in practice because the finite elements model has to be correctly modified for each machine and tool assembly while the statistical method uses observable measurements. Estimating the variation of the frequencies as good as possible opens up the opportunity to prevent spiralling by e.g. changing the rotary frequency.
Document Type: 
Working Paper

Files in This Item:
File
Size
582.81 kB





Items in EconStor are protected by copyright, with all rights reserved, unless otherwise indicated.